环境
准备工作
配置ansible(deploy 主机执行)
# ssh-keygen# for i in 192.168.3.{21..28}; do ssh-copy-id -i ~/.ssh/id_rsa.pub $i; done[root@deploy ~]# cat /etc/ansible/hosts [etcd]192.168.3.21192.168.3.22192.168.3.23[k8s-master]192.168.3.24192.168.3.25192.168.3.26[k8s-worker]192.168.3.27192.168.3.28[k8s:children]k8s-masterk8s-worker优化主机配置
关闭防火墙和selinux
# ansible all -m shell -a "systemctl stop firewalld && systemctl disable firewalld"# ansible all -m shell -a "sed -i 's/^SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config"修改limit
关闭交换分区
# swapoff -a# ansible k8s -m shell -a "yes | cp /etc/fstab /etc/fstab_bak"# ansible k8s -m shell -a "cat /etc/fstab_bak | grep -v swap > /etc/fstab"# ansible k8s -m shell -a "echo vm.swappiness = 0 >> /etc/sysctl.d/k8s.conf"# ansible k8s -m shell -a "sysctl -p /etc/sysctl.d/k8s.conf"配置ipvs
# cat /root/ipvs.sh #!/bin/bashyum -y install ipvsadm ipset####创建ipvs脚本 cat > /etc/sysconfig/modules/ipvs.modules << EOF#!/bin/bashmodprobe -- ip_vsmodprobe -- ip_vs_rrmodprobe -- ip_vs_wrrmodprobe -- ip_vs_shmodprobe -- nf_conntrack_ipv4EOF ####执行脚本，验证配置 chmod 755 /etc/sysconfig/modules/ipvs.modulesbash /etc/sysconfig/modules/ipvs.moduleslsmod | grep -e ip_vs -e nf_conntrack_ipv4########################## ansible k8s -m script -a "/root/ipvs.sh"配置网桥转发规则
# cat sysctl.sh #!/bin/bashcat > /etc/sysctl.d/k8s.conf << EOFnet.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1net.ipv4.ip_forward = 1EOFcat <<EOF | tee /etc/modules-load.d/crio.confoverlaybr_netfilterEOFmodprobe overlaymodprobe br_netfiltersysctl --system# ansible k8s -m script -a "/root/sysctl.sh"配置etcd集群
生成证书(ansible 主机操作)
# curl -o /usr/bin/cfssl https://pkg.cfssl.org/R1.2/cfssl_linux-amd64# curl -o /usr/bin/cfssljson https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64# curl -o /usr/bin/cfssl-certinfo https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64# chmod +x /usr/bin/cfssl*创建 CA 配置文件
# mkdir p ssl# cd /root/ssl# cat >ca-config.json <<EOF{ "signing": { "default": { "expiry": "876000h" }, "profiles": { "etcd": { "usages": [ "signing", "key encipherment", "server auth", "client auth" ], "expiry": "876000h" } } }}EOF创建 CA 证书签名请求
# cat >ca-csr.json <<EOF{ "CN": "etcd", "key": { "algo": "rsa", "size": 2048 }, "names": [ { "C": "CN", "ST": "beijing", "L": "beijing", "O": "jdt", "OU": "iot" } ]}EOF生成 CA 证书和私钥
# cfssl gencert -initca ca-csr.json | cfssljson -bare ca创建etcd的TLS认证证书
# cat > etcd-csr.json <<EOF{ "CN": "etcd", "hosts": [ "192.168.3.21", "192.168.3.22", "192.168.3.23", "192.168.3.24", "192.168.3.23", "192.168.3.26", "etcd1", "etcd2", "etcd3", "master1", "master2", "master3" ], "key": { "algo": "rsa", "size": 2048 }, "names": [ { "C": "CN", "ST": "beijing", "L": "beijing", "O": "jdt", "OU": "iot" } ]EOF生成 etcd证书和私钥并分发
# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=etcd etcd-csr.json | cfssljson -bare etcd# ansible etcd -m copy -a "src=/root/ssl/ dest=/export/Data/certs/"ETCD安装以及配置
创建数据目录
# ansible etcd -m shell -a "mkdir -p /export/Data/etcd_data"下载etcd并分发
# wget https://github.com/etcd-io/etcd/releases/download/v3.5.1/etcd-v3.5.1-linux-amd64.tar.gz# tar xf etcd-v3.5.1-linux-amd64.tar.gz && cd etcd-v3.5.1-linux-amd64# ansible etcd -m copy -a "src=etcd dest=/usr/bin/"# ansible etcd -m copy -a "src=etcdutl dest=/usr/bin/"# ansible etcd -m copy -a "src=etcdctl dest=/usr/bin/"# ansible etcd -m shell -a "chmod +x /usr/bin/etcd*"配置etcd
# cat etcd_config.sh #!/bin/bash#PEER_NAME指定本节点的主机名称/域名，#PRIVATE_IP指定本节点的IP(用于后面配置文件的生成)#ETCD_CLUSTER群集列表，是所有节点信息（内容格式: 各节点名称=https://ip:端口 名称任意但要有标识性）#ETCD_INITIAL_CLUSTER_TOKEN为该etcd集群Token,同一集群token一致interface_name=`cat /proc/net/dev | sed -n '3,$p' | awk -F ':' {'print $1'} | grep -E "^ " | grep -v lo | head -n1`ipaddr=`ip a | grep $interface_name | awk '{print $2}' | awk -F"/" '{print $1}' | awk -F':' '{print $NF}'`export PEER_NAME=`hostname`export PRIVATE_IP=`echo $ipaddr | tr -d '\r'`export ETCD_CLUSTER="etcd1=https://192.168.3.21:2380,etcd2=https://192.168.3.22:2380,etcd3=https://192.168.3.23:2380"export ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster-1"cat > /etc/systemd/system/etcd.service <<EOF[Unit]Description=etcdDocumentation=https://github.com/coreos/etcdConflicts=etcd.service[Service]Type=notifyRestart=alwaysRestartSec=5sLimitNOFILE=65536TimeoutStartSec=0ExecStart=/usr/bin/etcd --name ${PEER_NAME} \ --data-dir /export/Data/etcd_data\ --listen-client-urls https://${PRIVATE_IP}:2379 \ --advertise-client-urls https://${PRIVATE_IP}:2379 \ --listen-peer-urls https://${PRIVATE_IP}:2380 \ --initial-advertise-peer-urls https://${PRIVATE_IP}:2380 \ --cert-file=/export/Data/certs/etcd.pem \ --key-file=/export/Data/certs/etcd-key.pem \ --client-cert-auth \ --trusted-ca-file=/export/Data/certs/ca.pem \ --peer-cert-file=/export/Data/certs/etcd.pem \ --peer-key-file=/export/Data/certs/etcd-key.pem \ --peer-client-cert-auth \ --peer-trusted-ca-file=/export/Data/certs/ca.pem \ --initial-cluster ${ETCD_CLUSTER} \ --initial-cluster-token etcd-cluster-1 \ --initial-cluster-state new[Install]WantedBy=multi-user.targetEOF# ansible etcd -m script -a "/root/etcd_config.sh"启动ETCD
# ansible etcd -m shell -a "systemctl daemon-reload"# ansible etcd -m service -a 'name=etcd state=started'# ansible etcd -m shell -a "systemctl enable etcd"校验ETCD
注： ansible节点执行，需安装 etcdctl
# cat check_etcd.sh #!/bin/bashHOST1=192.168.3.21HOST2=192.168.3.22HOST3=192.168.3.23ENDPOINTS=$HOST1:2379,$HOST2:2379,$HOST3:2379#因为开启了证书验证，因此执行命令需加上证书KEY="--cacert=/root/ssl/ca.pem \--cert=/root/ssl/etcd.pem \--key=/root/ssl/etcd-key.pem"#etcd集群健康信息etcdctl --endpoints=$ENDPOINTS $KEY endpoint health#etcd集群状态信息etcdctl --endpoints=$ENDPOINTS $KEY --write-out=table endpoint status#etcd集群成员信息etcdctl --endpoints=$ENDPOINTS $KEY member list -w table# sh check_etcd.sh 192.168.3.22:2379 is healthy: successfully committed proposal: took = 6.670434ms192.168.3.23:2379 is healthy: successfully committed proposal: took = 7.021894ms192.168.3.21:2379 is healthy: successfully committed proposal: took = 6.938656ms+-------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |+-------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+| 192.168.3.21:2379 | a30c90f91c6bc0bf | 3.5.1 | 20 kB | false | false | 2 | 23 | 23 | || 192.168.3.22:2379 | 877407b6419f0fed | 3.5.1 | 20 kB | true | false | 2 | 23 | 23 | || 192.168.3.23:2379 | 75b3a36457698e9a | 3.5.1 | 37 kB | false | false | 2 | 23 | 23 | |+-------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------++------------------+---------+-------+---------------------------+---------------------------+------------+| ID | STATUS | NAME | PEER ADDRS | CLIENT ADDRS | IS LEARNER |+------------------+---------+-------+---------------------------+---------------------------+------------+| 75b3a36457698e9a | started | etcd3 | https://192.168.3.23:2380 | https://192.168.3.23:2379 | false || 877407b6419f0fed | started | etcd2 | https://192.168.3.22:2380 | https://192.168.3.22:2379 | false || a30c90f91c6bc0bf | started | etcd1 | https://192.168.3.21:2380 | https://192.168.3.21:2379 | false |+------------------+---------+-------+---------------------------+---------------------------+------------+安装配置 CRI-O
安装CRI-O
# cat get_cri-o.sh #!/bin/bashVERSION=1.22sudo curl -L -o /etc/yum.repos.d/devel:kubic:libcontainers:stable.repo https://download.opensuse.org/repositories/devel:kubic:libcontainers:stable/CentOS_7/devel:kubic:libcontainers:stable.reposudo curl -L -o /etc/yum.repos.d/devel:kubic:libcontainers:stable:cri-o:${VERSION}.repo https://download.opensuse.org/repositories/devel:kubic:libcontainers:stable:cri-o:${VERSION}/CentOS_7/devel:kubic:libcontainers:stable:cri-o:${VERSION}.repo# ansible k8s -m yum -a "name=cri-o,cri-tools state=latest"# ansible k8s -m shell -a "sudo systemctl enable --now crio"修改cri-o 存储路径
# ansible k8s -m shell -a "sed -i -e 's?^graphroot =.*?graphroot = "/export/Data/containers/storage"?g' /etc/containers/storage.conf"配置cgroup
# cat 02-cgroup-manager.conf [crio.runtime]conmon_cgroup = "pod"cgroup_manager = "systemd"# ansible k8s -m copy -a "src=02-cgroup-manager.conf dest=/etc/crio/crio.conf.d/"配置镜像加速
# cat images_mirr.sh #!/bin/bashcat >> /etc/containers/registries.conf << EOF[[registry]]prefix = "docker.io"location = "hub-mirror.c.163.com"[[registry.mirror]]prefix = "docker.io"location = "hub-mirror.c.163.com"EOF# ansible k8s -m script -a "/root/images_mirr.sh"# ansible k8s -m service -a 'name=crio state=restarted'配置LB
公有云使用负载均衡代替
高可用LB后续更新，暂用nginx代替
以下操作LB节点执行
[root@lb ~]# yum -y install epel-release.noarch[root@lb ~]# yum -y install nginx nginx-mod-streamnginx 配置文件中加入以下配置
stream { log_format main '$remote_addr [$time_local]' '$protocol $status $bytes_sent $bytes_received' '$session_time'; server { listen 16443; proxy_pass kubeapi; access_log /var/log/nginx/access.log main; } upstream kubeapi { server 192.168.3.24:6443; server 192.168.3.25:6443; server 192.168.3.26:6443; }}部署k8s
安装kubeadm、kubelet
# cat kube.sh #!/bin/bashcat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo[kubernetes]name=Kubernetesbaseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-\$basearchenabled=1gpgcheck=1repo_gpgcheck=1gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpgexclude=kubelet kubeadm kubectlEOFyum install -y kubelet-1.22.3-0 kubeadm-1.22.3-0 kubectl-1.22.3-0 --disableexcludes=kubernetessudo systemctl enable --now kubelet# ansible k8s -m script -a "/root/kube.sh"分发etcd证书
# ansible k8s -m shell -a "mkdir -p /export/Data/certs/"配置kubelet
# cat kubelet_conf.sh#!/bin/bashcat > /etc/sysconfig/kubelet <<EOFKUBELET_EXTRA_ARGS=--container-runtime=remote --cgroup-driver=systemd --container-runtime-endpoint='unix:///var/run/crio/crio.sock' --runtime-request-timeout=5mEOF# ansible k8s -m script -a "/root/kubelet_conf.sh"# ansible k8s -m service -a 'name=kubelet state=restarted'初始第一个master节点
# cat kubeadm_config.yaml apiVersion: kubeadm.k8s.io/v1beta2kind: ClusterConfigurationkubernetesVersion: v1.22.3imageRepository: registry.aliyuncs.com/google_containerscontrolPlaneEndpoint: "192.168.3.29:16443"networking: serviceSubnet: "10.96.0.0/16" podSubnet: "172.16.0.0/16" dnsDomain: "cluster.local"dns: type: "CoreDNS"etcd: external: endpoints: - https://192.168.3.21:2379 - https://192.168.3.22:2379 - https://192.168.3.23:2379 caFile: /export/Data/certs/ca.pem certFile: /export/Data/certs/etcd.pem keyFile: /export/Data/certs/etcd-key.pem---apiVersion: kubelet.config.k8s.io/v1beta1kind: KubeletConfigurationcgroupDriver: systemd---apiVersion: kubeproxy.config.k8s.io/v1alpha1kind: KubeProxyConfigurationmode: ipvs# ansible 192.168.3.24 -m copy -a "src=kubeadm_config.yaml dest=/root"# ansible k8s -m copy -a "src=/root/ssl/ dest=/export/Data/certs/"# ansible 192.168.3.24 -m shell -a "kubeadm init --config=/root/kubeadm_config.yaml --upload-certs"初始化第二个master节点
注: 密钥上步获得
# ansible 192.168.3.25 -m shell -a "kubeadm join 192.168.3.29:16443 --token de4x51.d923b7l0tbi0692t --discovery-token-ca-cert-hash sha256:b1a8f00caed912ac083d10d8ecd1e92ddf6870c768f91d4e43c91c2614e24e1a --control-plane --certificate-key 0b34ca2ebd85f99ff66b2f57b80708e2ac0368880da52a802e3feb01852f2d81"初始化第三个master节点
# ansible 192.168.3.26 -m shell -a "kubeadm join 192.168.3.29:16443 --token de4x51.d923b7l0tbi0692t --discovery-token-ca-cert-hash sha256:b1a8f00caed912ac083d10d8ecd1e92ddf6870c768f91d4e43c91c2614e24e1a --control-plane --certificate-key 0b34ca2ebd85f99ff66b2f57b80708e2ac0368880da52a802e3feb01852f2d81"初始化worker节点
# ansible k8s-worker -m shell -a " kubeadm join 192.168.3.29:16443 --token de4x51.d923b7l0tbi0692t --discovery-token-ca-cert-hash sha256:b1a8f00caed912ac083d10d8ecd1e92ddf6870c768f91d4e43c91c2614e24e1a"初始化kubectl
# mkdir -p $HOME/.kube# scp root@192.168.3.24:/etc/kubernetes/admin.conf $HOME/.kube/config# scp root@192.168.3.24:/usr/bin/kubectl /usr/bin/kubectl验证kubelet
[root@deploy ~]# kubectl get nodeNAME STATUS ROLES AGE VERSIONmaster1 Ready control-plane,master 41m v1.22.3master2 Ready control-plane,master 13m v1.22.3master3 Ready control-plane,master 12m v1.22.3worker1 Ready <none> 9m18s v1.22.3worker2 Ready <none> 9m19s v1.22.3部署网络模型
修改配置
---# Source: calico/templates/calico-etcd-secrets.yaml# The following contains k8s Secrets for use with a TLS enabled etcd cluster.# For information on populating Secrets, see http://kubernetes.io/docs/user-guide/secrets/apiVersion: v1kind: Secrettype: Opaquemetadata: name: calico-etcd-secrets namespace: kube-systemdata: # Populate the following with etcd TLS configuration if desired, but leave blank if # not using TLS for etcd. # The keys below should be uncommented and the values populated with the base64 # encoded contents of each file that would be associated with the TLS data. # Example command for encoding a file contents: cat <file> | base64 -w 0 etcd-key: LS0tLS1CRUdJTiBSU0EgUFJJVkFURSBLRVktLS0tLQpNSUlFcEFJQkFBS0NBUUVBNkZJNE91OUl4WU01L2IxUVBHa2RWQUF0UHc1QzA1b0MwN1Z0WGhWaWZDUzYwWitsCjV3aFRBRGRITVpvajhzdXB3dGU2a3IyUnpOYjluM2xGb2lqb0MxMjV4LzUvd2xZcWYyOWt1WTJrQzd4RlBwUFgKdHhwUmlUMEVFV09vTGVyQ202Y3RmMVhjR1RxTHBsZXorVTBCSGNRY0FoUnc3NFFHK1ByU3pDbzV5UDhGWTFHSQo0UWhHWkxyWnZXT0JJZGcyWjFGOHpvSVdVVE1QdWxrQ0Z6WHNDeENFVXY1TXFybjZsN0RZcWJ5K2drZG5qb2U3CklhQXp0UW5CZFVOMmEvdHdXSVE4S3YvSU15TTduT0plL29POG5rdDY4d2h6V1Ftc3p2VkdpSDI1SWhwUUxub3UKcmp1TEhBRERCaS9RM1JuWXdVZWZYTGVOZ1FoTmJYZXE0eGVuT1FJREFRQUJBb0lCQVFETVNjaHlZb211VFFlSQpqWmxwbGRFWlZaSnorVGxnVXZTYmI5VTlQemE4RFp4TnlzSWJGMkhOTmM2ZjJuZ3ovMDFITFdZOXRQN3BqaisxCnBQRkxlQWNjUDQyblJLN1psK1dFNjlJNXJFaU5uVCtTbUhTKzZTQzd1bkRDVGN6TW03d0hIWW5QaUJPa0I2eFgKV0pYRTZpYktJdkd5RG9HRXpLZEk5MTYzODRXZXJKejJneEhDMEZzUGcxOEJPV0NjMmM3SkN5UmdhOXl6Sk90UQpISWw5N0svNStNRXZpSFI0emhqV3hiTXNyVW55MllMQ1hPeW9reTBzVzN0U2RLbmZBUUs2RkJueWxFN3VVQnNXCm1XK2o3Kzl6ZUJGUVdRMlBGS1J4Q1o4amtYSSt1a1NhVzBoTER6b0d6OHBweno5UWNHMWVCOURqTFE5UHFCZDYKbTFkcnovU0JBb0dCQVBqY2x3TlEvOVFFUWhMc1Q3Nkw1OFpZQnBkQ2RUZTFMbG1vVWVIeDQveStJYlYwSkQ2eQpvRmpFbGEzZm1UOHA3THJGMXFQZjlNWmsrUmtRa3VjOGcyQUlyUXp0cmtrUnQxWmVSWHBhMHIzMU53emlEdTU3ClpLNnVWamM4S0NKYlV6S3NNcGZUajdRemFLelZNSFI3aWgxdzZOUWYxS0JNdG94Q3Rtc2MrdjBwQW9HQkFPNzgKSytxd3BJbWpCd2dXZm01NitSKzFzWXkrclZOMk1kZU9QdmRFTzRyQzlHSGlWT1VaaEM0WXlNRnJNOEh4TFd5RQo0eVpsMVpvNXZYVG5ha0JFUWxHU2E4L1NnMkZkY0tJdnNyTG9RUnBMTEhWMHo4b1E0Q2JWTW1GZkgwMDBMK1dICnBYYXNYaWlBdkcrdmxxOGk2Z1U2OGRnOFc2akFUeTZTTUNQTDBZdVJBb0dBU2h4L1NIaU54MWtCU0Z0aG9EQlAKOU14d0lnbWptTlIzR2pJN09GdHQ5dTIwWWpKVlBPcTdQOVJEY3dWY3dPZStYUnpmdit2SkhIQWprcWhSNTFVcApGcWRleWJQYXJGMy9TRlJJd3BoYm5FQnpoWDJvenJLbW1ETEk4Q2dWRjY0MHg2bHFZN2FZWENUWExtbEt4ZFdvCm12M3VDSVgyTDBySkxsb0xzemh0TW9rQ2dZQjJOdUw2YW5wWll2MDljUE1GYjJyLzFuNkhJbUxXWUNiemUzZUcKRklobmNWdzFkeUdMV2YzYVY0UW11UUtYTXRmSFVFeVVWOWM3UE1pTXBWUVhpaXhMOFdQSEgxakJ0dGphUVVIaAo0YVVpZm9EMWNOekFGV3pyaUpZdE9FSmhqQ2tOSHZZb0o4ZER2YnA0ZktESzdUaFpjZmpqZjZmUFo2RkRaaWpOCjdDb3hJUUtCZ1FDWTRWTDM5cG5KZVFQMFhYc1dHVnhVN2Z5Szh0YVFJVnk4Y0tXeVBGdXNaYklXSVM0eU5ENW8KWFI5cHZGYjdkbmQzMnJXaFNKeWZJVm9ZQWhMTXpyd2dBdnF5Q1J4MXdEU2NqdnRFbCs5ZUF1SWIrUFNYZEQ2NgpRMnFyWEttMjNlem0yVkpUL2MxWHlOb2FDYVExb1BPK1BBTDMxZkxiUklLdUZrUEMzVTRZSFE9PQotLS0tLUVORCBSU0EgUFJJVkFURSBLRVktLS0tLQo= etcd-cert: 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 etcd-ca: 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 ---# Source: calico/templates/calico-config.yaml# This ConfigMap is used to configure a self-hosted Calico installation.kind: ConfigMapapiVersion: v1metadata: name: calico-config namespace: kube-systemdata: # Configure this with the location of your etcd cluster. etcd_endpoints: "https://192.168.3.21:2379,https://192.168.3.22:2379,https://192.168.3.23:2379" # If you're using TLS enabled etcd uncomment the following. # You must also populate the Secret below with these files. etcd_ca: "/calico-secrets/etcd-ca" # "/calico-secrets/etcd-ca" etcd_cert: "/calico-secrets/etcd-cert" # "/calico-secrets/etcd-cert" etcd_key: "/calico-secrets/etcd-key" # "/calico-secrets/etcd-key" # Typha is disabled. typha_service_name: "none" # Configure the backend to use. calico_backend: "vxlan" # Configure the MTU to use for workload interfaces and tunnels. # By default, MTU is auto-detected, and explicitly setting this field should not be required. # You can override auto-detection by providing a non-zero value. veth_mtu: "0" # The CNI network configuration to install on each node. The special # values in this config will be automatically populated. cni_network_config: |- { "name": "k8s-pod-network", "cniVersion": "0.3.1", "plugins": [ { "type": "calico", "log_level": "info", "log_file_path": "/var/log/calico/cni/cni.log", "etcd_endpoints": "__ETCD_ENDPOINTS__", "etcd_key_file": "__ETCD_KEY_FILE__", "etcd_cert_file": "__ETCD_CERT_FILE__", "etcd_ca_cert_file": "__ETCD_CA_CERT_FILE__", "mtu": __CNI_MTU__, "ipam": { "type": "calico-ipam" }, "policy": { "type": "k8s" }, "kubernetes": { "kubeconfig": "__KUBECONFIG_FILEPATH__" } }, { "type": "portmap", "snat": true, "capabilities": {"portMappings": true} }, { "type": "bandwidth", "capabilities": {"bandwidth": true} } ] }---# Source: calico/templates/calico-kube-controllers-rbac.yaml# Include a clusterrole for the kube-controllers component,# and bind it to the calico-kube-controllers serviceaccount.kind: ClusterRoleapiVersion: rbac.authorization.k8s.io/v1metadata: name: calico-kube-controllersrules: # Pods are monitored for changing labels. # The node controller monitors Kubernetes nodes. # Namespace and serviceaccount labels are used for policy. - apiGroups: [""] resources: - pods - nodes - namespaces - serviceaccounts verbs: - watch - list - get # Watch for changes to Kubernetes NetworkPolicies. - apiGroups: ["networking.k8s.io"] resources: - networkpolicies verbs: - watch - list---kind: ClusterRoleBindingapiVersion: rbac.authorization.k8s.io/v1metadata: name: calico-kube-controllersroleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-kube-controllerssubjects:- kind: ServiceAccount name: calico-kube-controllers namespace: kube-system------# Source: calico/templates/calico-node-rbac.yaml# Include a clusterrole for the calico-node DaemonSet,# and bind it to the calico-node serviceaccount.kind: ClusterRoleapiVersion: rbac.authorization.k8s.io/v1metadata: name: calico-noderules: # The CNI plugin needs to get pods, nodes, and namespaces. - apiGroups: [""] resources: - pods - nodes - namespaces verbs: - get # EndpointSlices are used for Service-based network policy rule # enforcement. - apiGroups: ["discovery.k8s.io"] resources: - endpointslices verbs: - watch - list - apiGroups: [""] resources: - endpoints - services verbs: # Used to discover service IPs for advertisement. - watch - list # Pod CIDR auto-detection on kubeadm needs access to config maps. - apiGroups: [""] resources: - configmaps verbs: - get - apiGroups: [""] resources: - nodes/status verbs: # Needed for clearing NodeNetworkUnavailable flag. - patch---apiVersion: rbac.authorization.k8s.io/v1kind: ClusterRoleBindingmetadata: name: calico-noderoleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-nodesubjects:- kind: ServiceAccount name: calico-node namespace: kube-system---# Source: calico/templates/calico-node.yaml# This manifest installs the calico-node container, as well# as the CNI plugins and network config on# each master and worker node in a Kubernetes cluster.kind: DaemonSetapiVersion: apps/v1metadata: name: calico-node namespace: kube-system labels: k8s-app: calico-nodespec: selector: matchLabels: k8s-app: calico-node updateStrategy: type: RollingUpdate rollingUpdate: maxUnavailable: 1 template: metadata: labels: k8s-app: calico-node spec: nodeSelector: kubernetes.io/os: linux hostNetwork: true tolerations: # Make sure calico-node gets scheduled on all nodes. - effect: NoSchedule operator: Exists # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - effect: NoExecute operator: Exists serviceAccountName: calico-node # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. terminationGracePeriodSeconds: 0 priorityClassName: system-node-critical initContainers: # This container installs the CNI binaries # and CNI network config file on each node. - name: install-cni image: docker.mirrors.ustc.edu.cn/calico/cni:v3.21.0 command: ["/opt/cni/bin/install"] envFrom: - configMapRef: # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. name: kubernetes-services-endpoint optional: true env: # Name of the CNI config file to create. - name: CNI_CONF_NAME value: "10-calico.conflist" # The CNI network config to install on each node. - name: CNI_NETWORK_CONFIG valueFrom: configMapKeyRef: name: calico-config key: cni_network_config # The location of the etcd cluster. - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints # CNI MTU Config variable - name: CNI_MTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Prevents the container from sleeping forever. - name: SLEEP value: "false" volumeMounts: - mountPath: /host/opt/cni/bin name: cni-bin-dir - mountPath: /host/etc/cni/net.d name: cni-net-dir - mountPath: /calico-secrets name: etcd-certs securityContext: privileged: true # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes # to communicate with Felix over the Policy Sync API. - name: flexvol-driver image: docker.mirrors.ustc.edu.cn/calico/pod2daemon-flexvol:v3.21.0 volumeMounts: - name: flexvol-driver-host mountPath: /host/driver securityContext: privileged: true containers: # Runs calico-node container on each Kubernetes node. This # container programs network policy and routes on each # host. - name: calico-node image: docker.mirrors.ustc.edu.cn/calico/node:v3.21.0 envFrom: - configMapRef: # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. name: kubernetes-services-endpoint optional: true env: # The location of the etcd cluster. - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints # Location of the CA certificate for etcd. - name: ETCD_CA_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_ca # Location of the client key for etcd. - name: ETCD_KEY_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_key # Location of the client certificate for etcd. - name: ETCD_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_cert # Set noderef for node controller. - name: CALICO_K8S_NODE_REF valueFrom: fieldRef: fieldPath: spec.nodeName # Choose the backend to use. - name: CALICO_NETWORKING_BACKEND valueFrom: configMapKeyRef: name: calico-config key: calico_backend # Cluster type to identify the deployment type - name: CLUSTER_TYPE value: "k8s,bgp" # Auto-detect the BGP IP address. - name: IP value: "autodetect" # Enable IPIP - name: CALICO_IPV4POOL_IPIP value: "Never" # Enable or Disable VXLAN on the default IP pool. - name: CALICO_IPV4POOL_VXLAN value: "Always" # Set MTU for tunnel device used if ipip is enabled - name: FELIX_IPINIPMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Set MTU for the VXLAN tunnel device. - name: FELIX_VXLANMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Set MTU for the Wireguard tunnel device. - name: FELIX_WIREGUARDMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # The default IPv4 pool to create on startup if none exists. Pod IPs will be # chosen from this range. Changing this value after installation will have # no effect. This should fall within `--cluster-cidr`. - name: CALICO_IPV4POOL_CIDR value: "172.16.0.0/16" # Disable file logging so `kubectl logs` works. - name: CALICO_DISABLE_FILE_LOGGING value: "true" # Set Felix endpoint to host default action to ACCEPT. - name: FELIX_DEFAULTENDPOINTTOHOSTACTION value: "ACCEPT" # Disable IPv6 on Kubernetes. - name: FELIX_IPV6SUPPORT value: "false" - name: FELIX_HEALTHENABLED value: "true" securityContext: privileged: true resources: requests: cpu: 250m lifecycle: preStop: exec: command: - /bin/calico-node - -shutdown livenessProbe: exec: command: - /bin/calico-node - -felix-live #- -bird-live periodSeconds: 10 initialDelaySeconds: 10 failureThreshold: 6 timeoutSeconds: 10 readinessProbe: exec: command: - /bin/calico-node - -felix-ready #- -bird-ready periodSeconds: 10 timeoutSeconds: 10 volumeMounts: # For maintaining CNI plugin API credentials. - mountPath: /host/etc/cni/net.d name: cni-net-dir readOnly: false - mountPath: /lib/modules name: lib-modules readOnly: true - mountPath: /run/xtables.lock name: xtables-lock readOnly: false - mountPath: /var/run/calico name: var-run-calico readOnly: false - mountPath: /var/lib/calico name: var-lib-calico readOnly: false - mountPath: /calico-secrets name: etcd-certs - name: policysync mountPath: /var/run/nodeagent # For eBPF mode, we need to be able to mount the BPF filesystem at /sys/fs/bpf so we mount in the # parent directory. - name: sysfs mountPath: /sys/fs/ # Bidirectional means that, if we mount the BPF filesystem at /sys/fs/bpf it will propagate to the host. # If the host is known to mount that filesystem already then Bidirectional can be omitted. mountPropagation: Bidirectional - name: cni-log-dir mountPath: /var/log/calico/cni readOnly: true volumes: # Used by calico-node. - name: lib-modules hostPath: path: /lib/modules - name: var-run-calico hostPath: path: /var/run/calico - name: var-lib-calico hostPath: path: /var/lib/calico - name: xtables-lock hostPath: path: /run/xtables.lock type: FileOrCreate - name: sysfs hostPath: path: /sys/fs/ type: DirectoryOrCreate # Used to install CNI. - name: cni-bin-dir hostPath: path: /opt/cni/bin - name: cni-net-dir hostPath: path: /etc/cni/net.d # Used to access CNI logs. - name: cni-log-dir hostPath: path: /var/log/calico/cni # Mount in the etcd TLS secrets with mode 400. # See https://kubernetes.io/docs/concepts/configuration/secret/ - name: etcd-certs secret: secretName: calico-etcd-secrets defaultMode: 0400 # Used to create per-pod Unix Domain Sockets - name: policysync hostPath: type: DirectoryOrCreate path: /var/run/nodeagent # Used to install Flex Volume Driver - name: flexvol-driver-host hostPath: type: DirectoryOrCreate path: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds---apiVersion: v1kind: ServiceAccountmetadata: name: calico-node namespace: kube-system---# Source: calico/templates/calico-kube-controllers.yaml# See https://github.com/projectcalico/kube-controllersapiVersion: apps/v1kind: Deploymentmetadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllersspec: # The controllers can only have a single active instance. replicas: 1 selector: matchLabels: k8s-app: calico-kube-controllers strategy: type: Recreate template: metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers spec: nodeSelector: kubernetes.io/os: linux tolerations: # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - key: node-role.kubernetes.io/master effect: NoSchedule serviceAccountName: calico-kube-controllers priorityClassName: system-cluster-critical # The controllers must run in the host network namespace so that # it isn't governed by policy that would prevent it from working. hostNetwork: true containers: - name: calico-kube-controllers image: docker.mirrors.ustc.edu.cn/calico/kube-controllers:v3.21.0 env: # The location of the etcd cluster. - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints # Location of the CA certificate for etcd. - name: ETCD_CA_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_ca # Location of the client key for etcd. - name: ETCD_KEY_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_key # Location of the client certificate for etcd. - name: ETCD_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_cert # Choose which controllers to run. - name: ENABLED_CONTROLLERS value: policy,namespace,serviceaccount,workloadendpoint,node volumeMounts: # Mount in the etcd TLS secrets. - mountPath: /calico-secrets name: etcd-certs livenessProbe: exec: command: - /usr/bin/check-status - -l periodSeconds: 10 initialDelaySeconds: 10 failureThreshold: 6 timeoutSeconds: 10 readinessProbe: exec: command: - /usr/bin/check-status - -r periodSeconds: 10 volumes: # Mount in the etcd TLS secrets with mode 400. # See https://kubernetes.io/docs/concepts/configuration/secret/ - name: etcd-certs secret: secretName: calico-etcd-secrets defaultMode: 0440---apiVersion: v1kind: ServiceAccountmetadata: name: calico-kube-controllers namespace: kube-system---# This manifest creates a Pod Disruption Budget for Controller to allow K8s Cluster Autoscaler to evictapiVersion: policy/v1beta1kind: PodDisruptionBudgetmetadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllersspec: maxUnavailable: 1 selector: matchLabels: k8s-app: calico-kube-controllers---# Source: calico/templates/calico-typha.yaml---# Source: calico/templates/configure-canal.yaml---# Source: calico/templates/kdd-crds.yaml安装calico
# kubectl apply -f calico-etcd.yaml验证集群
[root@deploy ~]# kubectl get pod -n kube-systemNAME READY STATUS RESTARTS AGEcalico-kube-controllers-9767fc4b9-tk9fb 1/1 Running 0 6m56scalico-node-5mc9h 1/1 Running 0 6m56scalico-node-dswmp 1/1 Running 0 6m56scalico-node-qht2s 1/1 Running 0 6m56scalico-node-sdrcg 1/1 Running 0 6m56scalico-node-x58lj 1/1 Running 0 6m56scoredns-7f6cbbb7b8-fc8rd 1/1 Running 0 61mcoredns-7f6cbbb7b8-qvw2m 1/1 Running 0 61mkube-apiserver-master1 1/1 Running 2 94mkube-apiserver-master2 1/1 Running 0 66mkube-apiserver-master3 1/1 Running 0 64mkube-controller-manager-master1 1/1 Running 2 94mkube-controller-manager-master2 1/1 Running 0 66mkube-controller-manager-master3 1/1 Running 0 64mkube-proxy-bscfn 1/1 Running 0 62mkube-proxy-f2fpb 1/1 Running 0 64mkube-proxy-kt7nl 1/1 Running 0 66mkube-proxy-lzww8 1/1 Running 0 62mkube-proxy-zn6gj 1/1 Running 2 94mkube-scheduler-master1 1/1 Running 2 94mkube-scheduler-master2 1/1 Running 0 66mkube-scheduler-master3 1/1 Running 0 64m问题与解决
1 、 kubelet日报错 failed to get cgroup stats for "/system.slice/kubelet.service"
11月 18 09:00:42 master1 kubelet[2424]: E1118 09:00:42.948672 2424 summary_sys_containers.go:47] "Failed to get system container stats" err="failed to get cgroup stats for \"/system.slice/kubelet.service\": failed to get container info for \"/system.slice/kubelet.service\": unknown container \"/system.slice/kubelet.service\"" containerName="/system.slice/kubelet.service"11月 18 09:00:52 master1 kubelet[2424]: E1118 09:00:52.956142 2424 summary_sys_containers.go:47] "Failed to get system container stats" err="failed to get cgroup stats for \"/system.slice/kubelet.service\": failed to get container info for \"/system.slice/kubelet.service\": unknown container \"/system.slice/kubelet.service\"" containerName="/system.slice/kubelet.service"11月 18 09:01:02 master1 kubelet[2424]: E1118 09:01:02.961022 2424 summary_sys_containers.go:47] "Failed to get system container stats" err="failed to get cgroup stats for \"/system.slice/kubelet.service\": failed to get container info for \"/system.slice/kubelet.service\": unknown container \"/system.slice/kubelet.service\"" containerName="/system.slice/kubelet.service"11月 18 09:01:12 master1 kubelet[2424]: E1118 09:01:12.966033 2424 summary_sys_containers.go:47] "Failed to get system container stats" err="failed to get cgroup stats for \"/system.slice/kubelet.service\": failed to get container info for \"/system.slice/kubelet.service\": unknown container \"/system.slice/kubelet.service\"" containerName="/system.slice/kubelet.service"11月 18 09:01:22 master1 kubelet[2424]: E1118 09:01:22.970644 2424 summary_sys_containers.go:47] "Failed to get system container stats" err="failed to get cgroup stats for \"/system.slice/kubelet.service\": failed to get container info for \"/system.slice/kubelet.service\": unknown container \"/system.slice/kubelet.service\"" containerName="/system.slice/kubelet.service"解决方案
配置文件中写入 CPUAccounting=true 与 MemoryAccounting=true
[root@master2 ~]# cat /lib/systemd/system/kubelet.service.d/10-kubeadm.conf # Note: This dropin only works with kubeadm and kubelet v1.11+[Service]CPUAccounting=trueMemoryAccounting=trueEnvironment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf"Environment="KUBELET_CONFIG_ARGS=--config=/var/lib/kubelet/config.yaml"# This is a file that "kubeadm init" and "kubeadm join" generates at runtime, populating the KUBELET_KUBEADM_ARGS variable dynamicallyEnvironmentFile=-/var/lib/kubelet/kubeadm-flags.env# This is a file that the user can use for overrides of the kubelet args as a last resort. Preferably, the user should use# the .NodeRegistration.KubeletExtraArgs object in the configuration files instead. KUBELET_EXTRA_ARGS should be sourced from this file.EnvironmentFile=-/etc/sysconfig/kubeletExecStart=ExecStart=/usr/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_KUBEADM_ARGS $KUBELET_EXTRA_ARGS2、kubectl get cs 提示 dial tcp 127.0.0.1:10251: connect: connection refused
[root@deploy ~]# kubectl get csWarning: v1 ComponentStatus is deprecated in v1.19+NAME STATUS MESSAGE ERRORscheduler Unhealthy Get "http://127.0.0.1:10251/healthz": dial tcp 127.0.0.1:10251: connect: connection refused etcd-1 Healthy {"health":"true","reason":""} controller-manager Healthy ok etcd-0 Healthy {"health":"true","reason":""} etcd-2 Healthy {"health":"true","reason":""}解决方案
注释 port=0
[root@master1 ~]# cat /etc/kubernetes/manifests/kube-scheduler.yaml apiVersion: v1kind: Podmetadata: creationTimestamp: null labels: component: kube-scheduler tier: control-plane name: kube-scheduler namespace: kube-systemspec: containers: - command: - kube-scheduler - --authentication-kubeconfig=/etc/kubernetes/scheduler.conf - --authorization-kubeconfig=/etc/kubernetes/scheduler.conf - --bind-address=127.0.0.1 - --kubeconfig=/etc/kubernetes/scheduler.conf - --leader-elect=true# - --port=0 image: registry.aliyuncs.com/google_containers/kube-scheduler:v1.22.3 imagePullPolicy: IfNotPresent[root@deploy ~]# kubectl get csWarning: v1 ComponentStatus is deprecated in v1.19+NAME STATUS MESSAGE ERRORscheduler Healthy ok controller-manager Healthy ok etcd-1 Healthy {"health":"true","reason":""} etcd-2 Healthy {"health":"true","reason":""} etcd-0 Healthy {"health":"true","reason":""}作者：宗庄凯